-
Avoid the Noise or Damage to the Machine
NOTE: You need to connect the front-end equipment, such as microphones, mixers, guitars, etc., and then connet the back-end equipment such as amplifiers and speakers to avoid noise or damage to the machine.
-
Distorted or Unclear Sound?
01.Check if the gain is too high or low. Adjust the gain knob or fader to fix distortion.
02.Adjust the EQ settings if the sound isn't clear or balanced.
-
Unwanted Noise or Feedback?
01.Check if the microphone is too close to the speaker, causing feedback.
02.Make sure that all devices are correctly grounded to avoid any humming noises.
03.Check EQ settings. High gain levels in low-frequency bands can cause noise.
-
One Channel Not Working?
01.Check if the channel is muted or the volume is down.
02.Try to change the cable or microphone to check if they're causing the problem.
-
Effects Not Working?
01.Make sure the effect is enabled, and the corresponding control knob or slider is at the correct level.
02.If the effect requires input information like tempo, ensure that it's correctly set.
